Publicidad
Idiomas disponibles
Idiomas disponibles
3. Slide Axle Rod through Mounting Bracket
4. Install the two wheels onto the Axle Rod and secure with two
Axle Cap Nuts. Press Axle Cap Nut onto Axle Rod.
5. To assembly the fan body to the base,
place the bracket on the floor with the
left wheel in front of you.
6. Holding the main fan body, place on
the base and aligne the holes on the
body and the base. Then fix the body
to the base using the screws.
4. USING YOUR APPLIANCE
NOTE: Before inserting the plug into a power outlet, make
sure that the voltage corresponds to the one indicated on the
product label, and that the plug has a ground connection.
14
Publicidad
