Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
light fixture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range
Sensing angle
Electrical load
Bulb type
Sensor capacity
Power requirements
Operating modes
Time delay
DualBrite timer
TOOLS REQUIRED
Phillips
screwdriver
Circuit tester
Ladder
Up to 30 ft. (9.1 m) (Varies with surrounding temperature)
Up to 180°
Up to 60 watt maximum incandescent
Medium base, type "A", 60 watt maximum
Up to 360 Watt (3.0 A) maximum tungsten
120 VAC, 60 Hz
Test, Motion activated, Manual
1, 5, 10 minutes
Off, 3 hours, 6 hours, dusk-to-dawn
1/8 in. Flathead
screwdriver
Work gloves
Safety goggles
3
Please contact 1-855-HD-HAMPTON for further assistance.
Wire strippers/
cutters
Silicone
sealant
HAMPTONBAY.COM
Publicidad
