HAMPTON BAY HBI-4192-WH-D Guía Para El Uso Y Cuidado página 5

Installation
1
Removing the mounting
bracket
□
Remove the two decorative fixture nuts (CC)
from the light fixture (A).
□
Remove the mounting bracket (FF) from the
light fixture (A).
2
Installing the mounting bracket
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light fixture.
□
Remove the existing light fixture.
□
Tighten the two large mounting screws (DD)
finger tight into the mounting bracket (FF).
□
Attach the mounting bracket (FF) to the
junction box (not included) securely with the
two mounting bracket screws (AA).
□
Firmly pull on the mounting bracket (FF) to
verify it is securely mounted to the junction
box. If necessary, use the screws that were
removed from the existing light fixture.
CC
A
DD
AA
5
Please contact 1-855-HD-HAMPTON for further assistance.
FF
DD
FF
HAMPTONBAY.COM