Skil PWRCORE 12 Manual Del Propietário página 16

Installing and Removing the
Impact Socket (Fig. 9)
Your tool is equipped with a quick-change
square drive, making socket installation and
removal quick and easy.
Lock the trigger switch "OFF" by placing the
direction-of-rotation selector in the center posi-
tion.
NOTICE: Make sure that the impact socket
and the mounting portion are not damaged
before installing the impact socket.
To install the Impact Socket:
a. Align the square of the impact socket with
the square drive and push the impact socket
onto the square drive until it locks into place.
b. Tap it lightly if required.
To remove the Impact Socket:
a. Simply pull the impect socket off from the square drive.
WARNING
The impact socket may be hot after prolonged use.
16
Wear protective gloves when removing the so The impact socket
macket from the tool, or first allow the impact socket to cool down.
Fig. 9
Impact Socket
Square Dirve