Publicidad
Idiomas disponibles
Idiomas disponibles
18. Thermistor control temperature set up
Entering set up
mode.
You will see LqC1
Structure of
Press the High Temp. button.
Press the Med Temp. or Low Temp. button until appears in the
display.
Press the Start button.
Press the Med Temp. or the Low Temp. button until
appears in the display.
Press the Start button.
Press the Start button.
Display previous value.
Press Med Temp.(+) or Low Temp.(-) button to select
time between 38 ~ 62.
Press the Start button.
The machine sets up the thermistor control temperature.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press "High Temp. " twice
Button
Content of
• Regular hot (High Temp.)
thermistor control temperature set up
• Regular warm (Med Temp.)
thermistor control temperature set up
• Regular cold (Low Temp.)
thermistor control temperature set up
PROGRAMMING MODE
Display
41
Publicidad
