Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR MODE
Meaning of Error Codes that LED displays during occurrence or
problem.
Dryer error code
PROBLEM
It is displayed when thermistor is opened or
shorted
It is displayed when thermistor temperature
have increased about 17 degrees for
10 seconds
Disconnection of card reader wire.
It is displayed when blower fan motor is re-
strained.
It is displayed when thermistor temperature
have increased about 35 degrees from 5 to 10
minutes after starting.
It is displayed when airflow switch is open more
than 30 seconds When motor RPM is more than
600, It is displayed when airflow switch is open
more than 20 seconds.
It is displayed when airflow switch is open for 3
seconds after starting.
POWER FAIL RECOVERY
In case of power failure the machine stops running but the time display remains on, showing the time just before
power failure.
Press the START button after the power is restored, then the machine will restart.
POSSIBLE CAUSE
ERROR MODE / POWER FAIL RECOVERY
SOLUTION
Thermistor should be replaced.
Thermistor should be replaced.
Check the card reader wire.
Fan motor should be checked
Check the gas supply condition
Press reset switch during operating once and
then, check ignition operating
Check lint filter, exhaust duct, blower fan, and
front duct
Check air flow switch and drum motor
53
Publicidad
