Gigaset E560A Manual De Instrucciones página 50

Resetting the system PIN
If you have forgotten your system PIN, you can reset the base to the original code 0000:
Disconnect the power cable from the base. Hold down the registration/paging key on the base
while reconnecting the power cable to the base. Hold down the key for at least 5 seconds.
The base has now been reset and the system PIN set to 0000.
All handsets are de-registered and must be re-registered. All settings are reset to the
default settings.
Changing the call volume
You can set the handsfree volume to five different levels (1–5; e.g., volume 3 =
¤
Menu Settings
Settings OK
Changing ringers
•
Volume:
Five volume levels (1–5; e.g., volume 3 =
•
Melody:
List of pre-loaded ringer melodies. The first three melodies are the "classic" ringtones.
•
Time control:
You can specify a time period when you do not want the telephone to signal external calls
e.g., during the night.
¤
Menu Settings
Settings OK
If Ringer Volume / Ringtones is selected:
¤
(Select volume/melody)
If Time Control is selected, activate and set time control:
¤
Activation
¤
Settings OK Starting Time: /Ending Time:
Enter each time as a 4-digit number and press OK.
Resetting the base to the default settings
When the settings are restored:
•
Date and time are retained
•
Handsets are still registered,
•
Eco Mode is deactivated,
•
The system PIN is not reset.
¤
Menu Settings
en fr es
OK Audio / Visual Signals
Speaker Volume
OK Audio / Visual Signals
Ringer Volume / Ringtones / Time Control
OK (
OK ( = activated)
OK System
Availability and operation of the functions
may differ on your telephone.
OK Adjust the volume and press OK.
) and "Off" (volume 0 =
= melody selected)
OK Reset Base
Base settings
).
OK Base Audio
).
OK Base Audio
OK
OK
49