Publicidad
Idiomas disponibles
Idiomas disponibles
3. Install the Handles
NOTE: The spline adapter supplied in the blade handle kit is not
used with this faucet assembly.
Press one handle onto each cold and hot valve stem. Ensure that
the splines inside the handle and valve stem are engaged.
Check for proper alignment.
To adjust the alignment, remove the handles and reposition the
spline adapter on the valve stem spline.
After adjustment, press one handle back onto each cold and hot
valve stem.
Proceed to "Note" instructions for regular or vandal-resistant
installations.
NOTE: For regular installations, secure each cold and hot handle
assembly with a screw. Press the plug button into the screw hole.
NOTE: For vandal-resistant installations, insert one blue
vandal-resistant button into the top of the cold handle assembly.
Secure with a screw. Insert one red vandal-resistant button into the
top of the hot handle assembly. Secure with a screw.
Kohler Co.
Vandal Resistant
Screw
Vandal
Plug
Resistant
Button
Button
(Red/Blue)
Screw
Blade
Handle
Valve Stem
5
113700-2-AB
Publicidad
