Publicidad
Idiomas disponibles
Idiomas disponibles
Steering wheel audio control extra settings
Attention: The Axxess Updater App can also be used to program the following (3) sub-sections as well, pending that the interface has been initialized and programmed.
Changing radio type
If the LED flashes do not match the radio you have connected, you must
manually program the BX-FD3 to tell it what radio it is connected to.
1) After 3 seconds of turning the key on, press and hold the Volume Down button
on the steering wheel until the L.E.D. on the BX-FD3 goes solid.
2) Release the Volume Down button; the L.E.D. will go out indicating we are now
in Changing Radio Type mode.
3) Refer to the Radio Legend to know which radio number you would like to have
programmed.
4) Press and hold the "Volume-Up" button until the L.E.D. goes solid, then release.
Repeat this step for the desired radio number you have selected.
5) Once the desired radio number has been selected, press and hold the Volume
Down button, on the steering wheel, until the L.E.D. goes solid. The L.E.D. will
remain on for about 3 seconds while it stores the new radio information.
6) Once the L.E.D. goes off, the Changing Radio Type mode will then end. You can
now test the steering control wheel controls.
Note: If at any time the user fails to press any button for a period longer than
10 seconds, this process will abort.
BX-FD3
Radio legend
1. Eclipse (Type 1)
2. Kenwood
3. Clarion (Type 1)
4. Sony and Dual
5. JVC
6. Pioneer and Jensen
7. Alpine
8. Visteon
5
9. Valor
10. Clarion (Type 2)
11. Metra OE
12. Eclipse (Type 2)
13. LG
14. Parrot
15. XITE
16. Philips
Continued on the next page
Publicidad
