Publicidad
Idiomas disponibles
Idiomas disponibles
•
For long-term storage, please make sure the storage
temperature is -20°C - 45°C within one month, and 0°C -
35°C between two and twelve months.
•
The working environment of the battery pack is -20°C
-55°C for discharge, and 0°C~55°C for charge.
7.8
SERVICE
IMPORTANT
Wait for all movement to stop before adjusting, cleaning or
repairing. Repairs or maintenance requiring power should
be performed by trained maintenance personnel only. Read
and observe safety warnings in front of manual.
IMPORTANT
Repairs or maintenance requiring power should be
performed by trained maintenance personnel only.
•
Park the mower on level ground. Make sure that steering
control levers are in the neutral position, and that the deck
blade switch is in "OFF" position. Raise deck, remove the
magnetic bar and disconnect battery cables by pulling
inward on RED battery quick disconnect handle in battery
box compartment.
•
Any maintenance operation that requires the removal of
safety covers must be performed by a trained service
technician.
•
Before working on or under the deck, make certain the
magnetic bar is removed and deck blade switch cannot be
accidentally started and disconnect battery cables by
pulling inward on RED battery quick disconnect handle
in battery box compartment.
•
Use a stick or similar instrument to clean under the
mower, making sure that no part of the body -- especially
arms and hands -- is under mower.
•
Keep your machine clean and remove any deposits of
trash and clippings.
•
Keep battery compartment, deck and operator's station
clean of accumulated trash, grass clippings, and other
debris.
•
Clean battery compartment, drive motor compartment,
mower deck, seat, etc., of all dirt and debris. To clean, use
only compressed air. DO NOT use water, solvents, hard
cleaners or abrasives.
•
Always wear adequate eye protection when servicing the
batteries or when grinding mower blades and removing
accumulated debris. Never attempt to make any
adjustments or repairs to the mower's drive system,
mower deck or any attachment while the traction drive
system is running. Repairs or maintenance requiring
power should be performed by trained maintenance
personnel only.
•
Never work under the machine or attachment unless it is
safely supported with jack stands. Make certain machine
is secure when it is raised and placed on the jack stands.
•
The jack stands should not allow the machine to move
when the traction drive system is running and the drive
wheels are rotating. Use only certified jack stands. Use
English
only appropriate jack stands, with a minimum weight
rating of 2000 pounds (907.2 kg) to block the unit up.
Use in pairs only. Follow the instructions supplied with
the vehicle stands.
•
Do not touch hot parts of machine.
•
Keep nuts and bolts tight, especially the blade attachment
bolts. Keep equipment in good working condition.
•
Never tamper with safety devices. Check their proper
operation regularly.
•
Remove the magnetic bar before unclogging the
discharge chute.
•
Never clear the discharge chute with the machine
running. Remove the magnetic bar and be sure the blades
have stopped before cleaning. Use a stick to clear a
plugged discharge area. Never use your hand!
•
Stop unit and allow blades to stop before unclogging
chute. Grass collection system components are subject to
wear, damage and deterioration, which could expose
moving parts or allow objects to be thrown. Frequently
check components and replace with manufacturer's
recommended parts, when necessary.
•
Exercise caution when working under the deck as the
mower blades are extremely sharp. Wear gloves and use
extra caution when servicing them.
•
Use only genuine Cramer Mower parts to ensure that
original standards are maintained.
•
Always disconnect batteries when transporting unit. Keep
unit free of grass clippings, leaves and other debris.
8
CLEANING AND STORAGE
8.1
CLEAN THE MACHINE
•
Remove any build-up of grass and leaves on or around
the motor cover (Do not use water from a high-pressure
gun to flush the motor).
•
Occasionally wipe the mower clean with a dry cloth.
•
If debris builds up on the underside of the mower during
use, stop the motor, turn off the machine, and scrape it
clean using an appropriate tool.
8.2
STORE THE MACHINE
The following steps should be taken in order to prepare the
machine for storage.
•
Clean the machine as described in the previous section.
•
Inspect the blade and replace it or sharpen it, if required
(refer to the Maintenance section).
•
Do not store the machine next to corrosive materials, such
as fertilizer or rock salt.
•
Keep the machine out of the reach of children.
•
Do not cover the machine with a solid plastic sheet.
Plastic coverings trap moisture around the machine,
which causes rust and corrosion.
•
Check thoroughly for any worn or damaged parts that
need replacing and order them from your dealer.
15
EN
Publicidad
