Publicidad
Idiomas disponibles
Idiomas disponibles
Read these instructions thoroughly before beginning work.
Please leave instructions for customers. These instruction contain maintenance
and warranty information.
If necessary, remove the existing toilet.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity
means of installing these toilets in a back-to-back situation is when the toilet drain
to this installation.
In order for your new TOTO toilet to fit correctly, check the dimensions below:
1) The distance between
the finished wall to
the center of the toilet
outlet, rough-in "RI":
Please make sure that you have the correct outlet connection part:
"RI"
TSU01W.12R / TSU03W.12R / TSU06W.12
12"
(Supplied)
TSU01W.10R / TSU03W.10R
10"
(Optional - Must be purchased separately)
TSU01W.14R / TSU03W.14R
14"
(Optional - Must be purchased separately)
2) The water supply must be approximately 8 inches or 10 inches to the left (facing the
1) Clean any debris out of the closet
(see Illustration 1). The bolt should
be inserted into the slot with its
head down and threaded shank
pointed upward.
BEFORE INSTALLATION
Double Combination WYE / 1/8 Bend
YES
Supply
Valve
Outlet Connection Part No.
INSTALLATION PROCEDURE
Double Sanitary Tee / Sanitary Cross
Finished Wall
"RI"
3
NO
C/L
Closet
Flange
9"
7 "
11"
Ill. 1
Publicidad
