KitchenAid KFP1322 Instrucciones página 10

aSSEMblINg ThE FOOd PROCESSOR
Installing the multipur_pose blade
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
Installing the adjustable slicing disc
IMPORTaNT: The adjustable slicing disc can only be installed in one direction.
With the work bowl installed, place the
1
drive adapter on the power shaft of the
base.
10
Push to lock: Press down firmly on the
2
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
Then, attach the work bowl cover, being
sure it locks into place. See "Attaching
the work bowl cover" section.
Holding the adjustable slicing disc by
2
the 2 finger grips, align the pins on the
adjustable slicing disc adapter with the
L-slots on the disc. Slide the disc down
onto the adapter and turn to engage
the pins in the L-slot.