Solo 441 Manual Original página 5

a. Spray tank)
b. Tank lid screwed to
the filling socket (c)
d. Carry handle
e. Standing foot
f. On/off switch
g. Hand valve
h. Spray wand
i. Nozzle attachment
j. Spray tube holder
k. Carrying belt
l. Rechargeable
battery
7.1 Assembly
Assembly of the spraying wand (h):
Fig. 2
 Start the cap nut (p) evenly and screw the spray tube with the O
hand-tight without tools.
 Screw the nozzle attachment (i) onto the spray tube hand-tight without tools.
7 Work preparation
Fig. 1
Outside of work, the spraying wand (h) is attached to the spraying wand
holder (j).
Always remove the spraying wand perpendicular to the device from the spraying
wand holder, never on the side!
-
ring (16x3 mm) onto the hand valve (g)
ENGLISH 5