Publicidad
Idiomas disponibles
Idiomas disponibles
8
Commissioning
8.1
Filling - Venting
8.2
Starting
8.3
Operating mode
Installation and operating instructions • Medana PE3 • Ed.02/2023-04
CAUTION
Risk of damage to the pump!
Never operate the pump dry, even briefly.
The system must be filled before starting the pump.
CAUTION
Risk of damage to the pump
The pump must not operate at zero flow (discharge valve closed) for
more than 10 minutes.
WARNING
Risk of burns
Zero flow operation causes the water temperature to rise.
1.
Control button
2.
Red Led
3.
Green Led
Auto Mode: 3 types of operation programmed according to the desired pressure.
Manual Mode: constant pressure with high or medium speed.
(see table below)
Medana PE3-350EA
Display indicator
Green Led
Red Led
Green/Red Led + (suction
pressure)
Green/Red Led flashing simul-
taneously
Green/Red Led flashing by
turns
•
When the power is applied, operating in Mode 1
•
When push the control button, changing Mode as below
Medana PE3-350EA
Push the button 1 time
Push the button 2 time
Push the button 3 time
Push the button 4 time
Push the button 5 time
Mode
Auto Mode 1
Pressure range
Auto Mode 2
Pressure range
Auto Mode 3
Pressure range
Manual Mode 1
Manual Mode 2
Auto Mode 1 -> Auto Mode 2
Auto Mode 2 -> Auto Mode 3
Auto Mode 3 -> Auto Mode 1
Manual Mode 1 -> Manual Mode 2
Manual Mode 2 -> Manual Mode 1
en
Condition
2
0.8 -1.6kgf/cm
2
1.3 -1.6kgf/cm
2
1.3 -1.6kgf/cm
Constant high speed
driving
Constant medium
speed driving
13
Publicidad
