Descargar Imprimir esta página

Wilo Medana PE3 Instrucciones De Instalación Y Funcionamiento página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
en
2.2
Personnel qualifications
2.3
Safety consciousness on
the job
2.4
Safety instructions for
the operator
2.5
Safety instructions for
installation and mainten-
ance work
8
CAUTION
The product risks becoming damaged. "Caution" is used when there is a
risk to the product if the user does not observe procedures.
NOTICE
Note containing useful information for the user about the product. It as-
sists the user in the case of an issue;
The installation, application and maintenance personnel must
have the appropriate qualifications to complete this work. The
operator must ensure the personnel's areas of responsibility,
terms of reference and their supervision. If the personnel are not
in possession of the necessary knowledge, they are to be trained
and instructed. If necessary, this training can be carried out by the
product's manufacturer on the operator's behalf.
The existing directives for accident prevention must be adhered
to. Danger from electrical current must be eliminated. Local dir-
ectives or general directives [e.g. IEC, VDE etc.] and instructions
from local energy supply companies must be respected.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental cap-
abilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
Children must be supervised to ensure that they do not play with
the device.
If hot or cold components of the product or installation pose a
danger, it is the customer's responsibility to guard them against
being touched.
Guards protecting against touching moving components (such
as the coupling) must not be removed whilst the product is in
operation.
Hazardous fluids (i.e. which are explosive, toxic or hot) which
have leaked (e.g. from the shaft seals) must be disposed of so
that they pose no danger to persons or to the environment.
National statutory provisions must be respected.
Danger from electrical current must be eliminated. Local direct-
ives or general directives [e.g. IEC, VDE etc.] and instructions
from local energy supply companies must be respected.
The operator must ensure that all maintenance and installation
work is carried out by authorised and qualified personnel, who are
sufficiently informed from their own detailed study of the install-
ation and operating instructions. Work on the product/unit must
Installation and operating instructions • Medana PE3 • Ed.02/2023-04

Publicidad

loading