SP6931-2 Workshop 5 Gallon.qxp_SP6931 8/22/16 2:03 PM Page 5
STORAGE RACK ASSEMBLY & MOUNTING
Assembling Upper and Lower
Rack
Align the tabs in the upper rack with
notches in lower rack. Slide upper rack
forward until the hooks on the lower rack
engages the bottom flange of the upper
rack. You will hear an audible click when
the locks engage.
Mounting Storage Rack to Wall
injury:
• Do not mount storage rack over 5 feet
• Do not attach screws to drywall only.
• Do not sit or hang on storage rack.
• Do not exceed maximum weight limit
1. Choose a location that is indoors
and not exposed to rain. For best
performance and easy access,
Tab of
position the storage rack so the center
Upper
of the vacuum inlet port is no more
Rack
than 5 feet from floor and no more
Notch of
than 18 inches from an electrical outlet.
Lower
Rack
Upper
Rack
Lower
Rack
Vacuum Inlet
Port
5
WARNING: To reduce the risk of
from the ground.
of 40 pounds on storage rack.
Floor
5 Feet
Maximum