Publicidad
Depth
Control Rod
SDS
Chuck
Dust Guard
1. Turn the auxiliary handle in a clockwise direction while
is released so that the mount opening can pass freely on
top of the chuck.
2. Insert the hammer drill through the auxiliary handle
mount.
3. Loosen the lock knob (A) to insert
the depth control rod in the hexagonal
mount orifice.
4. Rotate the auxiliary handle together
with the mount until set into the
adequate position to operate the tool.
5. Turn the auxiliary handle to fix the
mount firmly to the hammer drill head.
• To adjust the depth control rod loosen
the lock knob (A), move the rod to the
desired position and tighten the lock
knob.
ENGLISH
6
Function
Selector
Blocking
Button
360°
Auxiliary
Handle
Two Prong Wrench
Auxiliary
Handle
Parts
Function Double
Selector
Crankshaft Cap
Assembly
Steps 1 & 2
Mount
5
Vibration
Shock Absorber
Trigger
Switch
Speed
Selector
Cord Protector
Power Cord
Depth
Control Rod
A
4
Non-Slip
Handle
3
Publicidad
