Manuales relacionados para Truper ROEL-30N-2
Resumen de contenidos para Truper ROEL-30N-2
- Página 1 Manual SDS Plus 3.85 A Joules Rotary Hammer Impact Energy Motor ROEL-30N-2 Applies for: Code Model 19256 ROEL-30N-2 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tool Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for Drills of fatal injuries please read and and Hammer Drills understand this Manual before using the tool.
- Página 3 Technical Data ROEL-30N-2 Code 19256 Description SDS Plus Rotary Hammer Chuck SDS Plus Voltage 220 V~ - 240 V~ Frequency 50 Hz Current 3.85 A Power 1.13 Hp Impact Energy 3 Joules Drilling Capacity Concrete: 1” Metal: 1/2” Wood: 1-9/16”...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for Drills and Hammer Drills Choose the right bit While operating the hammer drill CAUTION • Choose the right bit for the work piece. • Use the auxiliary handles, if supplied with the tool. It reduces the risk of severe injury and makes the job easier. Loss of control may result in personal injury.
- Página 6 Parts Depth Control Rod Non-Slip Handle Chuck Continuous Use Function 360° Button Speed Selector Block Auxiliary Rotation Selector Button Handle Direction Function Energy Selector Selector LED Indicator Dust Trigger Guard Switch Cord Protector Carbon Brush LED Indicator Power Cord Assembly 1.
- Página 7 Start Up Bit and Accessory Installation Bit with SDS-PLUS Shank • Clean and lubricate lightly the bit and / or accessory before installing. • Push the chuck jaw back while inserting the bit and / or accessory until stopping. Chuck •...
- Página 8 Start Up Changing the Operation Mode • Press the blocking button (E) and turn the function selector (F) into one of the 4 positions depending on the work to carry out until hearing a click. Assure the selector is properly secured. Never change the function selector position WARNING when the hammer drill motor is running.
- Página 9 Maintenance Claning and Care Lubrication • To guarantee adequate motor cooling, always keep slots • We recommend lubricating the tool transmission every clean and free of obstructions. carbon brush change in a Authorized • Regularly inspect all the assembly screws. Double-check Service Center.
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 . Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Stamp of the business.