Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Connect the video output to the selected terminal device.
5.
Connect the power JACK to the power supply unit and power-on the camera
6.
Adjust lens angle, slant and rotation, in order to capture correctly the selected images
7.
Loosen with a slotted screwdriver the adjusting rings for focus and varifocal adjustment.
Rotate to WIDE "W" to zoom out the subject (consequently, field and viewing angle are increased).
Rotate to TELE "T" to zoom in the subject (consequently, field and viewing angle are reduced).
Rotate to NEAR "N" to adjust focus of a near subject.
Rotate to FAR "∞" to adjust focus of a distant subject.
Adjusting ring for focuing
VARIFOCAL adjusting ring
8.
After focusing and varifocal adjustment operations, tighten again the adjusting rings in order not to
change the adjustments just performed.
9.
Use the menu button inside the minidome (see following paragraph)
10.
Fix the protection dome to the minidome base, by screwing the three previously removed screws
20
360°
75°
360°
Check pin of adjusting focus
ring
Check pin of VARIFOCAL
adjusting ring
DS1092-185
Publicidad
