Publicidad
Idiomas disponibles
Idiomas disponibles
Features
UPS Features
1
ON/OFF Button: When the UPS is on, press and release this button after one beep to
turn the UPS off.
2
LCD Touchscreen Panel: Provide current status of the UPS. For a detailed description,
refer to "Display UPS/Power Conditions" in the Basic Operation section.
3
Battery Backup/Surge Protected Outlets: These outlets offer battery backup support
and premium surge suppression for critical devices requiring battery backup support.
4
Surge Protected Outlets: These outlets offer premium surge suppression for critical
devices.
5
USB Communication Port: This port can connect your UPS to any computer for
automatic saves and unattended shutdown in the event of a power failure. Use with
Tripp Lite's PowerAlert
and the USB cable included with your UPS. This connection is optional, your UPS will
work properly without this connection.
Note: This UPS System provides basic communication compatibility with most integrated Windows
Macintosh
and Linux
®
6
Tel/DSL/Ethernet Line Protection Jacks: These jacks protect equipment against surges
over a single phone line or network connection. Connecting your equipment to these
jacks is optional; your UPS will work properly without this connection.
Note: Not compatible with PoE (Power over Ethernet) applications.
7
Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then reset by pressing
it in.
2
1
7
3
Software (available as a FREE download at www.tripplite.com)
®
power management applications.
®
8
5
6
IN
OUT
4
,
®
Publicidad
