Descargar Imprimir esta página

Reliable VELOCITY 260IR Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

DRY IRONING
The appliance has a steam control button (E) which, when set to off, allows dry
ironing (without steam) or with steam if it is switched on, a light indicates its
status, on/enabled off/disabled.
STEAM IRONING
It is possible to iron with steam as long as the tank has water and at any setting.
VERTICAL IRONING
It is possible to iron hanging curtains, items of clothing on their own hanger, etc.
To do so, follow these instructions:
Iron from top to bottom.
Important: for cotton and linen, it is recommended to put the base of the iron in
contact with the material. For other more delicate fabrics, it is recommended to
keep the base of the iron a few centimetres away.
AUTO SHUT OFF BYPASS
For those who want to leave their iron on for periods longer than 8 minutes at a
time (without the automatic shut off system activating) the Velocity 260IR has a
auto bypass feature that allows the iron to stay on indefinitely.
To activate this feature, with your hand completely off of the sensor handle,
simply press the steam on/off button (E) for 5 seconds.
After holding the steam button for 5 seconds, the LEDs will flash for 5 seconds
indicating that the auto shut off bypass has been deactivated.
When the iron is unplugged, the auto shut off bypass returns to its default
position.
Do not leave your iron unattended while the auto bypass feature is activated.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
Unplug the appliance from the main power supply.
Drain the water out of the appliance.
Clean the appliance.
12

Publicidad

loading