Descargar Imprimir esta página

GE P2B940 Manual Del Propietário página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

Probe
WARNING
Consuming undercooked food can result in foodborne illness. Use probe according to
the following instructions to ensure all portions of the food reach minimum safe cooking temperatures.
Recommendations for minimum safe food temperatures can be found at foodsafety.gov or IsItDoneYet.gov.
mode monitors the internal food temperature and turns the oven off when the internal food temperature reaches the
programmed temperature.
Always check the temperature at multiple locations in the food with a food thermometer after cooking to ensure that
all portions of the food have reached the minimum safe internal temperature for that food.
Proper Probe Placement
After preparing the meat and placing it on the cooking
pan follow these instructions for proper probe placement.
probe will rest in the center of the thickest part of
the food. For best performance the probe should
be fully inserted into the food. If the probe is not
located properly, it may not accurately measure the
temperature of the coolest portion of the food. Some
foods, particularly small items, are not well suited for
cooking with the probe due to their shape or size.
part of the breast.
of the roast.
center of the lowest large muscle or joint.
probe into the center of the dish.
the meatiest area, parallel to the backbone.
Probe Usage
To use the probe with preheating:
Bake, or Convection Roast
desired cooking temperature with the number pads.
3. Once the oven is preheated, place the food in the
oven and connect the probe to the probe outlet,
walls and probe outlet are hot.
the Probe pad and entering the desired food
temperature. The maximum internal food temperature
18
Bake, Convection
To use the probe without preheating:
the probe outlet in the oven.
Probe pad and enter the desired food
temperature. Then press the cook mode pad
Traditional Bake, Convection Bake, or Convection
Roast
with the number pads.
Probe Care Guidelines
product may result in damage to the probe outlet.
and removing them from the meat and outlet
pull on the cable when removing it.
completely defrosted before inserting the probe.
from the outlet until the oven has cooled.
steam clean cycle.
49-85222-1

Publicidad

loading