Champion 3Z182F Manual De Instrucciones página 6

Champion Operating Instructions & Parts Manual
Champion Two-Stage Air
Compressor Pumps
AIR COMPRESSOR OIL
SPECIFICATIONS
Compressors are factory filled with
CHAMPLUB hydrocarbon based recip
E
lubricant. This is an ISO 100 non-
N
detergent industrial lubricant with rust
G
and oxidation inhibitors specially
L
formulated for reciprocating
I
compressors. It is recommended this
S
compressor be maintained using this oil
H
for ambient temperatures above 32°F.
CHAMPLUB synthetic is a premium
grade diester based synthetic lubricant
providing excellent performance in high
temperature applications.
Do not mix oil
types, weights or brands.
"Emulsification of
oil (white milky substance) indicates
unsafe accumulation of moisture and
may be evidence compressor is
oversized for application. Failure to
promptly consult your local
distributor, or Champion Customer
Service, can be grounds to deny
warranty."
NOTES:
1. Normal break-in period of Champion
air compressors is 25 hours.
2. For the first 100 hours of compressor
operation, a careful and regular
check of the oil level should be
made. Maintanin oil level at the full
line.
CHANGING TO SYNTHETIC
LUBRICANT
(Applies to diester based synthetic
lubricant only).
If changing to synthetic lubricant, the
following steps must be completed.
1. Compressor must run for a 25 hour
break-in period using ChampLub
ISO 100 oil.
6
3Z182F and 3Z183F
2. Thoroughly drain existing oil from
crankcase.
3. Fill crankcase with a full charge of
synthetic lubricant.
4. Run compressor for 200 hours.
5. Stop compressor and thoroughtly
drain the synthetic lubricant.
6. Add a full charge of synthetic
lubricant.
7. Compressor now ready to run for
extended period before next lubricant
change.
LUBRICANT
DESCRIPTION PART NUMBER
1 Quart Bottle
ChampLub Mineral P13796A
Lubricant
1 Quart Bottle
P13929A
ChampLub Synthetic