Lenco SCD-580SI Manual De Usuario página 12

Remark
This system is designed to play mp3 encoded files only.
-
If you connect an mp3 player to the systems USB port, it may happen that some mp3 players cannot play
-
via usb. This is not a malfunction of your SCD-580
The USB port doesn't support connection with USB extension cables and can't connect to a computer
-
directly.
Removing of USB
To remove the USB, turn off the power or switch the function mode to either CD, Aux, or Tuner first. Un-plug the
USB by pulling it out from the USB socket directly, straightly without bending.
Bluetooth operation
Pairing a Bluetooth enabled device with the system.
1) Place the Bluetooth-enabled device for pairing and close to the system
2) Press Function button (13) to select BT function at main unit and the text "BT" will appear on LCD display (6)
For a short time. Then it will change to a flashing "Pairing"
3) Set the Bluetooth-enabled device to search for other available Bluetooth devices until it recognizes
"Lenco SCD-580".
4) Select "Lenco SCD-580" to start pairing.
5) Wait until the pairing has completed. The display will show "BT" again.
6) Now you can start playback the music of your device through this system to enjoy the music. 1) BT music play
can be controlled with the Play/Pause
7) To stop using the active Bluetooth device, turn off the Bluetooth device. The LCD display (6) on the unit will
now change to a flashing "PAIRING" and it now can connect to another Bluetooth device.
Aux-in connection
You can connect an external audio device to the unit by connecting it to the 3,5mm AUX-in jack (11).
1. Press Function button (13) to select "AUX" mode.
2. Start to playback your external device
3. Set the volume to the desired level. If you experience sound distortion, reduce the volume of your external
device.
More features
A. Sleep function
1. Press Sleep button (14) "SLP-OFF" will shown on the LCD display (6).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >....10 minutes respectively
and sleep icon "SLEEP" will flash on LCD.
3. System will stop and go into standby mode automatically after running the selected time. After selecting the
desired sleep time, the "sleep" indicator will stop flashing, which means the sleep timer is activated.
4. To cancel the sleep mode, press Sleep/Timer button (14) until "SLP-OFF" is displayed. The "sleep" indication
on the LCD display (6) will disappear.
(8), Tune / Down (17).
12