s
Rear Terminals
Conexión posterior
Prises arrières
Installation Instructions / Instructivo de Instalación
Hazardous Voltage
Hazardous Voltage
Will cause death or serious injury
Will cause death or serious injury
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOT suitable for use with 100% rated circuit breakers.
[ NO para uso con interruptores a 100% intensidad continua. ]
NG
RTLNSF | 3VL9700-4RG01
s
6X M8 X 30 mm
6X M8 Washers
s
18X M8 X 30 mm
18X M8 Washers
NG
SRTNF3 | 3VL9700-4RH31
24X M8 X 30 mm
24X M8 Washers
NG
SRTNF4 | 3VL9700-4RJ31
8 0 6 8 6 9 A 0 1
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
MG
RTLMSF | 3VL9600-4RG01
4X M6 X 20mm
4X M6 Washers
s
2X M8 X 30 mm
2X M8 Washers
RTLMLF | 3VL9600-4RP01
s
s
MG
4X M6 X 20 mm
4X M6 Washers
2X M8 X 30 mm
2X M8 Washers
SRTMF4 | 3VL9600-4RJ41
16X M6 X 20 mm
16X M6 Washers
s
8X M8 X 30 mm
8X M8 Washers
1 / 4
U.S. Cat. No.
3VL9600-4RG01
Item:
RTLMSF
3VL9600-4RP01
RTLMLF
3VL9600-4RH31
SRTMF3
3VL9600-4RH41
SRTMF4
3VL9700-4RG01
RTLNSF
3VL9700-4RH31
SRTNF3
3VL9700-4RJ41
SRTNF4
For Use With Frame MG, NG
Para Usar Con Caja Base MG, NG
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
Cal ISO 6789
Ø = .2 8"
[ Ø = 7.1 ]
MG
SRTMF3 | 3VL9600-4RH31
6X M8 X 30 mm
6X M8 Washers
s
12X M6 X 20 mm
12X M6 Washers
MG
I.L. No. 806869A01
Euro Order No.
5 mm
6 mm