Nacon MG-X ANDROID Manual De Instrucciones página 3

I Control elements
View Button
LB / LT
Left joystick'
D-pad
USB-C charging port
I Turning the controller on/off
To turn on the controller, simply press the HOME button, and the controller will connect
to the last phone it was synced with.
To turn off the controller, simply hold down the Home button for 6 seconds.
Please note: the controller turns off after 15 minutes of inactivity to save battery power.
I Synchronsing your Android phone with the Nacon MG-XA controller
Go to the Bluetooth menu on your phone and start a Bluetooth device search.
Press the HOME button on your controller, and the player indication LED should start
flashing steadily.
Press and hold the Bluetooth button on the lower right-hand side for 3 seconds to initiate
pairing. The player indicator LED should start flashing rapidly.
On your phone, you should see the controller appear under the name 'Nacon MG-XA',
select it and wait until the controller is in the list of paired devices.
I Synchronising your iPhone® with the Nacon MG-XA controller
Go to the Bluetooth menu on your Apple® phone (Ipad®, Iphone®, Ipod®) and start a
Bluetooth device search.
Press the Home button on your controller, and the player indication LED should start
flashing steadily.
Press and hold the Start+Bluetooth buttons on the lower right-hand side for 3 seconds
to initiate pairing. The player indicator LED should start flashing rapidly.
On your Apple® phone (Ipad®, Iphone®, Ipod®), you should see the controller appear
under the name "Nacon MG-XA iOS"; select it and wait until the controller is in the list
of paired devices.
Note: Apple® compatibility neither tested nor approved by Apple®. You must have access to a gaming service
that supports the controller for Apple® devices.
RB / RT
Menu Button
Action buttons
Battery LED
Right joystick
Player indication LED
HOME Button
Bluetooth sync button
EN /