Operation Instructions
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
Clock/ Pre-Set
1) Press "
2) Turn "
" to adjust the hour figures, the input time should be within 0--23.
3) Press "
Clock/ Pre-Set
4) Turn "
" to adjust the minute figures, the input time should be within 0--59.
Clock/ Pre-Set
5) Press "
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
will go back to the previous status automatically.
2. Microwave Cooking
Press "
Microwave/Grill/Combi.
Microwave/Grill/Combi.
"
and "P100", "P80" "P50", "P30" or "P10" will display for each added press. Then
Start/+30Sec./Confirm
press"
0:05to 95:00. Press "
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press "
Microwave/Grill/Combi.
Microwave/Grill/Combi.
2) Press "
microwave power.
3) Press "
Start/+30Sec./Confirm
4) Turn "
" to adjust the cooking time until the oven displays "20:00".
5) Press "
Start/+30Sec./Confirm
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1
min
1---5
min
5---10 min
10---30 min
30---95 min
GB
", the hour figures will flash.
", the minute figures will flash.
" to finish clock setting. ":" will flash, and the time will light.
", the LED will display "P100. Press
" for times or turn "
" to confirm, and turn "
Start/+30Sec./Confirm
" once, the screen display "P100".
" once again or turn"
" to confirm, and the screen displays "P 80".
" to start cooking .
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
" to choose the power you want,
" to set cooking time from
" again to start cooking.
" to choose 80%
8
", the oven
Stop/Clear