Velleman CAMIP5N Manual Del Usuario página 4

Ocultar thumbs Ver también para CAMIP5N:

Idiomas disponibles

6. Hardware installation and operation

• Choose a location for the camera, keeping following guidelines in mind:

• Do not install the camera in locations where extremely high or low temperatures or excessive

vibrations may occur.

• Avoid mounting the camera near high electro-magnetic fields.

• Do not aim the camera at the sun or other extremely bright objects.

• The camera can be used free standing or in combination with the included mounting bracket. When

the mounting bracket is used, attach it to the wall or ceiling using the 2 included screws. Place the

CAMIP5N on top and secure it with the centre screw. Determine the desired angle and tighten the

joint screws.

• Connect the antenna [6] to the antenna connector and/or connect a network cable (included) to

the RJ45 jack [9].

Note: it is possible to connect the camera straight to the RJ45 port of a computer. In this case a

crossed cable (not incl.) should be used and network settings must be configured manually.

• An external microphone (not incl.) can be connected to the audio input [8].

• When desired, an external speaker system can be connected to the audio output [7].

• Plug the DC connector of the power adaptor into the 5VDC input jack [12]. Only use the included

adaptor or one with the same specifications.

• Plug the adaptor into a suitable mains outlet (100~240V AC/50~60Hz).

Notes:

• It takes about 30s for the camera to initialise.

• During initialisation the camera will start moving to test the pan/tilt functionality.

• When the image appears out of focus, turn the lens [4] to adjust.

7. Software installation

• Insert the included CD-ROM into a suitable computer system (not incl.).

System requirements: CPU ≥ 2.06 GHz / memory ≥ 256MB / network ≥ 10 MB / video card ≥

64MB memory / recommended OS: Windows 2000 or XP / Mac.

Windows

• Locate the software installer IPCamSetup.exe and double click it.

• Follow the instructions on the screen. Click Next to start the software installation.

13.12.2010

CAMIP5N

©Velleman nv