Velleman CAMIP5N Manual Del Usuario página 5

Ocultar thumbs Ver también para CAMIP5N:

Idiomas disponibles

• Click Next again.

• To finish software installation, the computer must be restarted. Select 'Yes I want to restart my

computer now' and click on Close.

• After reboot, the IP Camera Tool icon appears on the desktop.

Mac

• Locate and open the folder "For MAC".

• Open the folder "IP camera Tool" and copy the tool to your MAC to use it.

8. Software set-up

• Make sure all connections are properly made (see also §6) and double click on the IP Camera

Tool icon to start the software.

8.1

IP Camera Tool

• The software starts searching for cameras over the LAN. 3 Situations can occur:

o No cameras are found on the LAN. If after 1 minute the software does not detect any cameras,

check all cabling of the system and make sure the camera is powered.

13.12.2010

CAMIP5N

©Velleman nv