Leviton renu 4-WAY Manual De Instrucciones

renu
TM
WARNING:
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH ELECTRICAL CODES AND REGULATIONS.
CAUTION: USE THIS DEVICE WITH COPPER OR COPPER CLAD WIRE ONLY.
NOTE: This device uses a self-grounding clip that provides an automatic ground connection only when installed in a properly grounded
metal wallbox.
WARNING:
1. TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT
THE POWER IS OFF BEFORE WIRING!
2.
Connect wires per appropriate WIRING DIAGRAM, using one
of the wiring methods below.
NOTE: Back and side wire terminal screws accept up to #12
AWG copper or copper clad wire.
3A. TO SIDE WIRE: Remove insulation approx. 3/4" (1.9 cm).
Loop wires clockwise 3/4 turn around terminal screws. Firmly
tighten screws over wire loops.
3B. TO BACKWIRE: Remove insulation per strip gauge on
device approx. 5/8" (1.6 cm). Insert straight wires under
clamps of appropriate terminal screws. Tighten screws firmly.
4.
Mount device with "TOP" up using long mounting screws.
5.
Snap Renu Screw-less wallplate directly onto device strap
TM
with Leviton logo properly oriented.
6.
Restore power at circuit breaker or fuse.
Installation is complete.
NOTE: Your device may include color options. To change color of
the face see COLOR CHANGE figures.
Black Screw
1
vis noire
Tornillo negro
Brass Screw
2
vis laiton
Tornillo de Latón
Ground (Green Screw)
3
Terre (vis verte)
Tierra (Tornillo Verde)
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and
proper use for five years from the purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option, if within such five year period the product is returned prepaid, with proof
of purchase date, and a description of the problem to Leviton Manufacturing Co., Inc., Att: Quality Assurance Department, 201 North Service Road, Melville, New York 11747. This warranty excludes
and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened,
abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including
merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for
a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment,
lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
4-WAY SWITCH
Cat. No. RE154 - Rated: 15A-120/277V AC
INSTALLATION
4-WAY / À QUATRE VOIES / 4-VÍAS
RE153 RE154
2 2
3
2 1 2
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
COLOR CHANGE / CHANGEMENT DE COULEUR / CAMBIO DE COLOR
Push in sides at tabs and pull to release
Serrer les côtés au niveau des pattes
pour dégager la face
Presione en los lados de las pestañas
y jale para soltar
RE153
2
3
1
1 2 1
Load
Charge
Carga
DI-000-RE154-20A
Insert the bottom hinge tabs, then
pivot and snap the color kit to attach
Insérer les pattes inférieures et faire
basculer le haut pour l'enclencher
Inserte la punta de la base de las pestañas,
gire y presione el juego de color para unir
Line Hot (Black)
Ligne actif (noir)
Linea Fase (Negro)
Line 120/277VAC, 60 Hz
Ligne 120/277 V c.a., 60 Hz
Línea 120/277VCA, 60Hz
Neutral (White)
Neutre (Blanc)
Neutro (Blanco)
English