Publicidad
Idiomas disponibles
Idiomas disponibles
PTO (Power Take-Off) button
The PTO button engages and disengages the PTO
clutch and the cutting deck or other equipment
connected to it. The correct start conditions must be
obeyed to engage the drive of the blades. Refer to
Operation conditions on page 9 for the correct
start conditions.
•
Pull the PTO button out to engage the drive to
the blades or other equipment.
•
Push the PTO button in to disengage the drive to
the blades or other equipment.
Fuel shut-off valve
Product overview on page 3 for the position
Refer to
of the fuel shut-off valve.
The fuel shut-off valve is closed when the tab on the
knob is perpendicular to the fuel line.
Fuses
The location of the fuses is in the fuse box. The fuse
box is below the seat. Tilt the seat forward to get
1718 - 001 - 23.08.2021
access the fuse box. Refer to the decal on the fuse
box for identification of the different fuses.
Hour meter
The product has an hour meter that show how many
hours of operation that the blades have been
Product overview on page 3 for
engaged. Refer to
the position of the hour meter.
Each 50 hours an oil level symbol will show for 2
Lubrication schedule on page 24 .
hours. Refer to
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be
careful and use the product correctly.
Use protective glasses.
Parking brake.
Engine speed – fast.
Slow.
5
Publicidad
