Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
TEMPERATURE CONTROL
1. Power Button: Press this button to turn the
appliance on. Press and hold this button for 3
seconds to turn the appliance off.
2. Light Button
3. Power Light: Indicator light illuminates to signify
that cooling mode is currently in operation.
4. Set Temperature Display: Shows the
temperature setting.
5. Current Temperature Display: Shows the current
internal temperature.
6. °C / °F: Indicator light signifi es which
temperature scale is currently being displayed.
7. Up and Down Buttons: Used to increase or
decrease the set temperature in 1° increments.
4
3
1
2
INTERIOR LIGHT
The interior light will default to turning on and off
when the door is opened or closed.
Press the light button once to turn the light off while
the door is open. The light will resume default
functioning when the door is closed.
Press the light button twice to set the light to
continuous illumination. The light will remain on
when the door is opened and closed.
When the light is set to continuous illumination,
press the light button once to return to default
functioning.
FUNCTION INSTRUCTION
The default temperature setting is 54°F (12°C). The
default temperature scale is °F.
To switch the display between °F and °C, press
the Up and Down buttons simultaneously for
approximately 3-5 seconds.
The temperature can be set as low as 39°F (4°C) or
as high as 64°F (18°C).
Actual temperature inside the appliance can vary
based on ambient temperature, how often the
door is opened and how many warm bottles have
recently been added to the appliance.
Each depression of the Up and Down buttons will
adjust the temperature in 1° increments.
Door Ajar Alarm: If the door is not closed
completely for 5 minutes, an alarm will sound. Close
the door to silence the alarm.
5
If the door is closed and the alarm continues to
sound, check that the actuator at the bottom of
6
the door is making contact with the switch on the
appliance.
7
Temperature Memory: If the appliance loses power,
the control panel will remember the set temperature.
Once power is restored, the appliance will return to
normal functioning automatically.
Temperature Alarm: If the inner cabinet temperature
is higher than 73°F (23°C) for one hour, the error
code "HI" will show on the display panel and an
alarm will sound.
If the inner cabinet temperature is lower than 32°F
(0°C) the error code "LO" will show on the display
panel and an alarm will sound.
If the inner cabinet temperature remains at 32°F
(0°C) for more than 30 minutes, the error code
"CL" will show on the display panel and an alarm
will sound. The appliance will stop functioning to
prevent the contents from freezing.
6
Publicidad
