Publicidad
Idiomas disponibles
Idiomas disponibles
operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Glass blender jar
2. Lid
3. Lid insert
4. Knives
5. Motor unit
6. Speed dial
7. Power cord and plug
operAtion - before use for the first time
1.
Take the appliance out of the packaging.
2.
Clean the appliance (see 'Cleaning and maintenance').
operAtion - Use
1. Put the blender jar in the correct position on the motor unit and turn firmly into place.
The blender is fitted with a safeguard. The blender cannot be switched on if the blender jar is not fitted
to the motor unit, or is not fitted in the correct manner.
2. Dice the solid ingredients.
3. Fill the blender jar with the solid ingredients, and then add the liquid, where relevant (maximum 1 liter).
4. Fit the lid on the blender jar.
5. Fit the lid insert to the lid.
6. Put the plug into the wall socket.
7. Turn the speed dial to the required setting: P = Pulse, 0 = off, 1 = moderate, 2 = fast
The smoothness of the mixture increases with longer blending times (maximum of 180 seconds).
8. Switch off the blender (set to '0').
9. Wait until the blender's knives have come to a complete standstill before removing the blender jar from
the motor unit.
•
Whilst the blender is in operation you can add additional ingredients via the filling opening in the lid.
•
The Pulse setting can be used to operate the blender briefly at maximum speed. The Pulse function
operates only whilst the switch is held in the Pulse position.
•
Prepare crushed ice by filling the blender jar with ice cubes and repeatedly turn the speed dial to
setting pulse ("P") until you obtain ice of the required consistency.
•
Cut meat and other solid ingredients into small pieces before adding them to the blender jar.
•
To prepare tomato juice cut the tomatoes into four pieces and pour into the filling opening in the
blender jar's lid whilst the blender is in operation.
•
If the blender does not operate at the required speed switch off the appliance ('0') and: a. set the
switch to the Pulse position, or b. stir the ingredients with a spatula, or c. remove some of the
ingredients in the blender jar.
2.
3.
1.
4.
5.
6.
7.
19
User's instructions
Publicidad
