Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
To install the unit and the display securely, be sure
to follow the steps to in order.
Removing the trim ring and the mounting sleeve
(page 15)
Before mounting the unit (page 15)
Mounting the unit in the dashboard (page 16)
Attaching the joint cover (page 16)
Setting up the display (page 16)
Making sure the mounting positions of the
display (page 18)
Organizing the USB cable (page 18)
Attaching the display to the unit (page 18)
For your safety
After mounting the display to the unit, make sure
that the display does not interfere with normal
driving operations such as blocking the driver's
view or getting the cables tangled.
Removing the trim ring and the
mounting sleeve
Before installing the unit, remove the trim ring
and the mounting sleeve from the unit.
1
Pinch both edges of the trim ring , then
pull it out.
2
Insert both release keys until they click,
and pull down the mounting sleeve , then
pull up the unit to separate.
Face the hook
inwards.
Before mounting the unit
Before mounting the unit in the dashboard, arrange
the USB extension cables.
USB cable connection diagram
1
Remove the cable cover, store the USB
extension cable (short) to the groove of
the unit, then attach the cable cover.
Position the USB cable so that its connector
(male) comes to the front side of the unit.
Cable cover
*
* USB connector (male)
2
Route the USB extension cable (long)
inside the dashboard, then connect the USB
cable (short) from the unit.
Position the USB cable so that its connector
(male) comes out from the center console panel.
*
*
* USB connector (male)
Smartphone, USB device
(not supplied)
Release the lock of the
cable cover when
removing it.
15
GB
Publicidad
