Publicidad
Idiomas disponibles
Idiomas disponibles
To enable the alarm, set the alarm to be "On". To disable the alarm, set it to "Off".
When the alarm starts, press and hold the
Note:
The alarm function is available only when the unit is in Adaptor charging mode.
-
When the unit is operated using built-in battery, the alarm setup cannot be done,
-
because the time will not be memorized in battery standby mode.
Snooze Function (Only in Adaptor Charging Mode. Adaptor Not Included.)
Snooze function can be operated normally only when it is in adaptor charging mode.
You can activate the "Snooze" function by pressing the ENTER knob when the alarm starts.
The alarm sound will be muted and you can sleep for another short period of time according
to the snooze time set. Press the ENTER knob repeatedly to set the snooze time of 5, 10, 15 or
30 minutes. After the snooze time, the alarm will sound again. To stop the snooze function,
press and hold the
Equaliser Operation
You can also enjoy different EQ sound presets. These EQ presets are Classic, Jazz, Pop, Rock,
Speech and My EQ.
At My EQ Setup, Treble/Bass can be configured manually.
Time/Date
Under the Time/Date selection, there are several setups as described below.
Set Time/Date
You can manually set the time and the date under this menu.
Auto Update
You can set the Time/Date update condition as listed below.
"from Any" :
Time/Date will be updated by either DAB or FM broadcast
"from Digital Radio" :
Time/Date will be updated by DAB broadcast only
"from FM" :
Time/Date will be updated by FM broadcast only
"No Update" :
Time/Date will never be updated
Set 12/24 Hour
You can set the time display format as 12 or 24 Hour display.
Set Date Format
You can set the date display format as DD-MM-YYYY or MM-DD-YYYY.
Clock Style
You can set the clock style display in Standby mode. They are Normal Digital, Big Digital,
Classic Analog and Modern Analog.
Note:
STANDBY button.
STANDBY button to stop the alarm.
14
Publicidad
