Publicidad
Idiomas disponibles
Idiomas disponibles
■
For
transportation,
secure
movement or falling to prevent injury to persons or
damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service, bring the product to an
authorised service centre for repair. When servicing, use
only original replacement parts.
■
Ensure the battery is removed or the supply cord is
disconnected from the power supply before maintaining,
cleaning, reparing, or making adjustments.
■
You may make adjustments and repairs described in
this manual. For other repairs, contact an authorised
service centre.
■
For the replacement line, use only nylon filament line
of the diameter described in the specification table of
this manual.
■
After extending the new cutter line, always return the
product to its normal operating position before starting.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in a safe
working condition.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
Injury caused by vibration
–
Hold the product by designated handles and restrict
working time and exposure.
■
Injury caused by exposure to noise
–
Wear hearing protection and limit exposure.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
the
product
against
that can be taken by the operator to possibly reduce the
effects of vibration:
■
■
■
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 111.
Parts
1. Rear handle
2. Trigger
3. Telescoping collar
4. Charger
5. Battery latch button
6. Battery pack
7. Pivoting button
8. Spool cover
9. Spool
10. Eyelet
11. Cutting line
12. Cut-off blade
13. Safety guard
14. Edging button
15. Lower shaft
16. Upper shaft
17. Handle adjustment knob
18. Front handle
19. Lock-out trigger
SYMBOLS ON THE PRODUCT
Keep your body warm in cold weather. When using
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
After each period of operation, exercise to increase
blood circulation.
Take frequent work breaks. Limit the amount of
exposure per day.
WARNING
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye protection
Wear ear protection
Wear non-slip safety footwear when
using the product.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
3
Publicidad
