Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manual
before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and
extending the service life of the device. In addition to
the safety instructions in this operating manual, you
must also observe the regulations applicable to the
operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
26 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1.
On/off switch
2.
Carrying handle
3.
Quick coupling connection positive
4.
Quick coupling connection negative
5.
Earth clamp
6.
Quick coupling for polarisation change
7.
Burner nozzle
8.
Burner
9.
Burner button
10. Hose assembly connection (MIG)
11. Pressure regulator
12. Manometer
13. Indicator lamp for operation
14. Indicator lamp for overheating
15. Potentiometer for wire feed
16. Potentiometer for setting the welding current
17. Selection button for welding process
18. MMA welding process
19. LIFT TIG welding process
20. MIG welding process
21. Welding mask
3. Scope of delivery
• Operating manual
• Welding machine
• Hose assembly
• Welding wire reel
• Earth clamp
• Combination wire brush with slag hammer
4. Proper use
This welding machine is suitable for welding metals
such as carbon steel, alloy steel, other stainless steels,
copper, titanium etc. The product has an indicator
lamp, a thermal protection display and a cooling fan.
It is also equipped with a carrying strap for safe lifting
and moving of the product.
www.scheppach.com
Publicidad
