Publicidad
Idiomas disponibles
Idiomas disponibles
Features
1
ON/OFF Button: When the UPS is OFF, press and hold the ON/OFF button until a beep
is heard to turn the UPS ON. When the UPS is ON, press and hold the ON/OFF button to
turn the UPS OFF.
2
LCD Touchscreen Panel: Provides current status of the UPS. For a detailed description,
refer to "Display UPS/Power Conditions" in the Basic Operation section.
3
Battery Backup/Surge Protected Outlets: These outlets offer battery backup support
and premium surge suppression for critical devices requiring battery backup support.
4
Surge Protected Outlets: These outlets offer premium surge suppression for critical
devices.
5
USB and RS-232* Communication Ports: These port can connect your UPS to
any computer for automatic saves and unattended shutdown in the event of a power
failure. Use with Tripp Lite's PowerAlert
www.tripplite.com) and the USB cable included with your UPS. These connections are
optional, your UPS will work properly without this connection.
*All models include a USB communication port. Select models also include an RS-232 serial port.
Note: This UPS System provides basic communication compatibility with most integrated Windows
Macintosh
and Linux
®
6
Tel/DSL/Ethernet Line Protection Jacks: These jacks protect equipment against surges
over a single phone line or network connection. Connecting your equipment to these
jacks is optional; your UPS will work properly without this connection.
Note: Not compatible with PoE (Power over Ethernet) applications.
7
Resettable Input Circuit Breaker: Protects your electrical circuit from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then reset by pressing
it in.
8
Fan: Provides cooling during AVR mode or when the UPS is operating in battery mode.
18-12-064-933901.indb 9
Software (available as a FREE download at
®
power management applications.
®
9
,
®
1/9/2019 5:01:24 PM
Publicidad
