Publicidad
Idiomas disponibles
Idiomas disponibles
OSCILLATION:
For the automatic oscillation from right to left press the knob (6) placed on top of the motor.
To disable it, pull up the knob.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired
angle. It is sufficient to move the front of the fan up or down
according to the desired slope.
ADJUSTMENT HEIGHT
Loosen the height adjustment knob (14), then set the desired
height for the fan. Tighten firmly the knob after adjusting the rod.
N.B: this operation must always be carried out while the fan is turned off.
(EN) MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and unplug it.
Ensure that the fan is switched off from the supply mains before removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
10 / 39
Publicidad
