Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Special features
Active Waterjet (for prewash)
NOTE
• The Active Waterjet function stops operating automatically when the washer detects
the maximum water level.
• The Active Waterjet function stops operating automatically 5 minutes after it begins. To
add more water, press Active Waterjet again to resupply water.
• If the Active Waterjet function is activated immediately after the washer turns on,
the washer will spray water for 1 second before supplying water through the Active
Waterjet outlet.
• To drain water added by the Active Waterjet function, turn the power off. Water will be
drained automatically for few minutes, and then you can turn the power on again when
the water is completely drained.
CAUTION
• Do not block the Active Waterjet outlet with hands. Water may leak outside the tub,
causing a system failure.
• Do not use the Active Waterjet to wash shoes, food, or pets.
• Due to differences in air pressure, water coming from the Active Waterjet may splatter
when you first activate it.
42
English
You can use the Active Waterjet function
to hand-wash your items before you put
them in the washer.
1. Press Power to turn on your washer.
2. Open the lid.
3. Press Active Waterjet to supply water.
4. Hand-wash the items.
5. When done, press Active Waterjet again
to stop the water.
NOTE
If you want to hand-wash while the
washer is operating, press Start/Pause
(Hold to Start) to stop operation, and then
follow steps 1-4 above.
Publicidad
