Shine KITCHEN SJV-107 Manual De Funcionamiento página 13

The motor does
• Check that the power cord is plugged into a working socket.
not turn on. • Check that all parts have been assembled correctly.
• If your machine may have shut off due to overheating allow
• Contact your customer service center.
• Check whether there is a lot of pulp in the Auger Housing.
Trouble
removing the
• Check whether there is any hard objects stuck in the Feeding
Feeding Chute.
• Contact your customer service center.
• Use the REV button to dislodge any stuck pulp or produce.
The juicer stops
• Feed the juicer at a slower pace.
during operation.
• Cut your produce into smaller pieces.
• Contact your customer service center.
Leak from the • Check to see if the silicone sealing ring is in place at the
bottom of the
Auger Housing.
• Check to see if there is any damage to the silicone sealing ring.
• Feed the juicer at a slower pace.
• Contact your customer service center.
The Auger
• This is normal during operation and is designed to reduce strain
Housing moves
while juicing.
your machine to rest until it has cooled down and then try
restarting operations.
If so, turn the juicer on to remove the excess pulp.
Chute. The REV button may help dislodge it.
bottom center of the Auger Housing.
on the moving parts.
9. TROUBLESHOOTING
EN
13