Shine KITCHEN SJV-107 Manual De Funcionamiento página 8

4. HOW TO ASSEMBLE
1. Attach the Auger
Align the "
the Auger Housing with the
"
Body, then rotate clockwise
so that the "
aligned with the " " mark.
2. Insert the Juicing
Screen
Insert the Juicing Screen
into the center of the Auger
Housing until it is firmly
in place. The notch that
is visible on the screen
should slide into the front
notch in the top of the
auger housing nearest to
the pulp exit.
3. Insert the Auger
Insert the Auger into
the center of the
Juicing Screen and
through the silicone
sealing ring of
the Auger Housing.
Firm pressure may be
needed.
#juicetribe inspiration:
Sip & Savor the day!
8
Housing
•
" mark on
" mark on the Main
•
" mark is
4. Attach the Feeding
Align the "
Feeding Chute with the
"
Housing, then rotate clock-
wise so that the "
aligned with the " " mark.
5. Use the Included
Place the Pulp Container in
front of the machine under
the pulp exit. Place the
Juice Container to the right
of the pulp container under
the juice exit. Make sure
the Juice Cap is completely
closed before you begin
juicing. Insert the Pusher
into the Feeding Chute.
Pulp Juice
Container Container
Chute Housing Lid
•
" mark on the
" mark on the Auger
•
" mark is
Accessories