Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS
Appliance controls
The control panel is shown in figure 10. For reference it is also shown below:
Temperature adjustment sensor (A)
This button is used to adjust the temperature within the appliance. Press this sensor
once to activate adjustment, and then as many times as necessary until the desired
level is selected. The settings range from 1 to 6 with 1 being the warmest and 6 being
the coldest.
Please note: Where possible, avoid having the temperature setting on 6 all of the
time. This well help to alleviate strain on the compressor and refrigeration system.
Temperature setting display (B)
This display will illuminate the current temperature setting. Adjusting the tempera-
ture will cycle through this display.
Please note: You do not use numbers 1 to 6 to change the temperature. Instead, use
the refrigerator temperature adjustment sensor (A).
Power button (C)
Use this sensor to switch the appliance on and off (standby mode). The sensor will
be illuminated when the appliance is off.
53
Publicidad
