About The Temperature Controls - Fagor FQ8925X Manual De Instrucciones

About the temperature controls.

External Set Point Controls
(0-9)
Ambient temperature limits
28
All manuals and user guides at all-guides.com
The temperature controls are preset in the factory at 5 for both the refrigerator and freezer compartments.
To adjust the set point temperature, press the "+" (warmer) or "-" (colder) button on either the Freezer or
Refrigerator side. The set point light will come on. Press "+" or "-" until the desired setting is reached.
Several adjustments may be required. Each time you adjust controls, allow 24 hours after each adjust-
ment for the refrigerator to reach the setting you have selected.
Setting either or both controls to 0 stops cooling in both the freezer and refrigerator compartments, but
does not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage and operating conditions and
may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
This refrigerator is designed to operate in ambient temperatures specified by its Temperature Class,
which is marked on the rating plate.
Temperature
Symbol
Class
Extended-
SN
Temperate
Temperate
Subtropical ST
Tropical
NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient
temperature and frequency of door openings. Adjust temperature controls as required to compensate for
these factors.
Ambient Temperature
Maximum
32ºC
N 32ºC
38ºC
T 43ºC
Minimum
10ºC
16ºC
16ºC
16ºC