Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Troubleshooting
Problem
Possible solution
Check the connection to the power supply
Check the fuse in the plug, if blown, replace
(UK only).
Check that the blow/vacuum tube assembly is
Failure to operate
correctly fitted to the powerhead.
If the fuse continues to blow - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER
authorisedrepair agent.
Switch off - disconnect from the mains power
supply, debris should fall clear of the tube.
Remove and empty the collection bag.
Check that both the inlet and exit ports on the
vacuum tube are clear.
Poor vacuum/high
pitched whine
Remove any debris from the fan area.
If poor vacuuming continues - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER
authorised
repair agent
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Keep the appliance clean and dry.
u
Remove any leaves stuck to the inside of the vacuum
u
tube.
Regularly clean the ventilation slots with a clean, dry paint
u
brush.
Regularly clean the collection bag and ensure that it is
u
clean and empty after each use.
To clean the appliance, use only mild soap and a damp
u
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
Self lubricating bearings are used in your product,
u
therefore lubrication is not required.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
12
(Original instructions)
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
V
AC
Power Input
W
Capacity
L
Weight (blower)
kg
Weight (vaccum)
kg
Level of sound pressure according to EN 50636-2-100
Sound pressure level at the operator position: (L
(K) 1.2 dB(A)
Sound power level (L
) 102.5 dB(A), uncertainty (K) 1.1 dB(A)
WA
Vibration total values (triax vector sum) according to EN 50636-2-100
Vibration (a
) 3.0 m/s
h
EC DECLARATION OF CONFORMITY
MACHINERY DIRECTIVE
BEBLV300SB Blower Vac
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60335-1:2012+A11:2014+A13:2017+A1:201
9+A14:2019+A2:2019, EN50636-2-100:2014.
2000/14/EC, Annex V
LWA (measured sound power level) 102.5 dB(A),
Uncertainty (K)=1.1 dB(A),
LWA (guaranteed sound power) 104 dB(A).
These products also comply with Directive 2014/30/EU and
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
BEBLV300SB
) 90.0 dB(A), uncertainty
pA
, uncertainty (K) 1.8 m/s
2
2
2011/65/EU.
230
3000
40
3.6
4.4
Publicidad
