SPORTSTECH HGX250 Manual De Usuario página 51

STEP 10
Attach the right butterfly adjustment(25#) through the hole of the front press base and secure them with 1pc spacer
(71#),cover(53#), 1pc M6 Aircraft nut (104#) and 1pc M6X33 Allen bolt(142#).
Attach the right butterfly (10#) to the right butterfly adjustment(25#) and secure them together 1pc M8×23 Allen bolt (90#),1
pcs plastic washer(73#), 1 pc Ø6 washer (108#) and 1pc M6 Aircraft nut (104#). You can select the desired butterfly position
with the lock pin (52#).
Attach the foam roll (37#) as the diagram shows and secure the handle bar(12#) with 1 pc M10*20 Allen bolt(92#) and 1pc
Ø10 washer(105#).
Use the same way to install the left ones.
EN
51