Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up your dishwasher
Control panel
01 POWER
02 Cycles
03 Hi-Temp Wash
04 Sanitize
05 Control Lock
(3sec)
06 Indicator
12
English
DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd 12
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers
off automatically.
Select the appropriate wash cycle depending on the soil level of
your dishes.
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
NOTE
Hi-Temp Wash is not available for the Delicate and Express 60
cycle.
The temperature rises to 156 ˚F (69 ˚C) in the final rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the "Sanitize" lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the "Sanitize" lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certified.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential diShwashers. Certified residential
dishwashers are not intended for licensed food establishments.
Control Lock lets you lock the buttons on the control panel so
children cannot accidentally start the dishwasher. To activate
Control Lock, hold the Control Lock button down for three (3)
seconds. To de-activate Control Lock, hold the Control Lock button
down for three (3) seconds again.
Rinse refill
• If the "Rinse refill" indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and requires a refill.
Delay start
• If the "Delay start" indicator is lit, it means, you selected the
"Delay Start" option.
2020-05-08
2:15:10
Publicidad
