Publicidad
Idiomas disponibles
Idiomas disponibles
07 Display Window
08 Delay Start
09 START
NOTE
• You can select options (Hi-Temp Wash, Sanitize) before starting a cycle. If you change
the cycle after selecting an option, the original cycle is reset.
• When you pause a cycle by opening the door during operation, press the START button
before closing the door to continue the cycle.
- Push the door firmly closed within 3 seconds of pressing the START button.
- If the door is not closed within 3 seconds, the cycle will not start.
• To prevent the touchpad from losing response sensitivity, follow these instructions:
- Touch the center of each keypad using one finger. Do not push.
- Clean the touch control's surface regularly with a soft, damp cloth.
- Be careful not to touch more than one touch key pad at a time, except as directed.
IMPORTANT
To get the best performance from your dishwasher, read all the operating instructions
before using it for the first time.
DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd 13
Displays the running time, Delay start hours, and information
codes. If a problem occurs during operation, a check message will
be displayed with a warning sound.
Delay a cycle for up to 24 hours in one-hour increments. The hour
displayed indicates the time at which the wash will be started.
To start a cycle, press the START button before closing the door.
* Reset: To cancel a currently running cycle and drain the
dishwasher, press and hold the START button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then
press START to restart the dishwasher.
English
13
2020-05-08
2:15:11
Publicidad
