Publicidad
Idiomas disponibles
Idiomas disponibles
Using your dishwasher
Setting mode
You can change the sound, auto door open function and rinse aid level settings to your
preference.
Entering the Setting mode
1. Turn the dishwasher on.
2. Press and hold the Auto cycle button for five seconds within 60 seconds from turning
on the dishwasher.
- When you entered the Setting mode, the display will show "0:00".
Sound setting
You can turn the sound on or off.
1. Press the Hi Temp button to select the sound setting menu.
- The display shows the current setting. (Default setting: "U1")
2. Press the Auto cycle button to change the setting.
- U0: Sound off
- U1: Sound on
3. Wait 5 seconds to save the setting.
Auto door open function setting
You can set the dishwasher to automatically open the door after each cycle for better
drying results.
1. 1. Press the Sanitize button to select the auto door open function setting menu.
- The display shows the current setting. (Default setting: "A1")
2. 2. Press the Auto cycle button to change the setting.
- A0: Function disabled
- A1: Function enabled
3. Wait 5 seconds to save the setting.
Rinse aid level setting
You can change the amount of rinse aid applied during a cycle.
1. Press the Express 60 button to select the rinse aid level setting menu.
- The display shows the current setting. (Default setting: "d4")
2. Press the Auto cycle button to change the setting.
- You can select from d1 - d5 (minimum – maximum).
3. Wait 5 seconds to save the setting.
24
English
DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd 24
2020-05-08
2:15:13
Publicidad
