Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "CT" appears.
SUR EQ
SET UP
2
Press (4) (n) repeatedly until "CT-ON"
appears.
The clock is set.
SUR EQ
SET UP
3
Press (SHIFT) to return to the normal
display.
EN
To cancel the CT function
Select "CT-OFF" in step 2 above.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by the
CT function and the actual time.
12
CTOFF
CT
CTON
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble levels
independantly.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BAL (balance) n FAD (fader)
2
Adjust the selected item by pressing (+)
or (–).
Adjust within three seconds after selecting.
(After three seconds, the buttons function
as volume control buttons.)
Muting the sound
Press (MUTE).
"MUTE-ON" flashes momentarily.
To restore the previous volume level, press
(MUTE) again.
Tip
The unit decreases the volume automatically when a
telephone call comes in (Telephone mute function).
Publicidad
